Whichever brand or model you have your Oven, Range or Aga all ovens will be completely stripped down, our professional deep cleans consist of the following process;
Doors
will be removed, dis-assembled so all glass can be de-greased, cleaned and polished to a shine.
All removable parts
of the oven cavity such as shelves, supports, liners, fan cover, fan and bulb covers and door seals will be placed in our bespoke ‘Heat and Treat’ dip tank within the vehicle.
The Oven cavities
themselves will follow a five step process;
1. Dry blade to remove as much of the burnt on carbon deposits and excess grease and fats.
2. Products applied to all surfaces and agitated/scoured every 20 minutes. This process can take as many times as required to hydrate stubborn deposits for them to be removed.
3. Thorough wet clean and dry.
4. Dry blade and scour of all areas with any remaining deposits.
5. Final wet clean, dry and polish to a shine
Once thoroughly cleaned inside and out, all parts of the oven will then carefully be reassembled. Finally the oven front will be cleaned and polished to a shine before re-setting the clock and turning the oven on. After only a few minutes drying out time your oven will be ready to use.
Hob tops
Depending upon the hob you have Induction, Gas or Electric we have an array of products and techniques we will use. Gas hobs will have pan stands, burner rings and caps removed and will be independently cleaned along with all control knobs. Before the re-assembling of all the above mentioned parts the hob will receive a though de-greasing clean and polish.
Extractors/Hoods
Mesh filters will be removed and de-greased and cleaned, paper filters will be removed and replaced (additional charge). Complete de-greasing of the entire unit including bulb covers before a wet clean, dry clean and polish subject to material.